Samsung Galaxy J2 Prime SM-G532F – Official Firmware OS 6.0.1 for flashing with Odin
nstructions for installing firmware multifile.
It is assumed that all the preliminary steps you made, and the flasher device correctly conjugate.
Multifile firmware basically removes all data from the device.
If after downloading and unzipping the firmware you see some BLxxxxxxx.tar file type or CPxxxxxxx.tar.md5 etc. – Means you have downloaded multifile (three-, four-, etc.) firmware.
The names of parts of multi-file firmware (file) correspond to the fields in Odine. However, only since version 3.09 changed field names, which specifies the path to the necessary files, so in older firmware versions and names from the files are old. Below are matching new / old values:
BL = Bootloader (loader)
AP = PDA (CODE)
CP = PHONE (MODEM)
CSC = CSC (regional part)
Firmware.
Do not forget to switch your device to work with Odin (boot mode / Odin mode / Download mode) mode.
In the Odin window, in the respective fields, specify the path to the firmware files:
BL ………. tar.md5 file into a field «BL»
AP File (or CODE) ………. tar.md5 inserted in the «AP»
CP File (or MODEM) ………. tar.md5 inserted in the «CP»
CSC …….. tar.md5 file into a field «CSC»
In the <Options> Program tab, make sure the check mark placed correctly:
- Items Auto Reboot and F. Reset Time are marked;
- Other items are not marked.
Press the <Start> button. Will start the process of firmware.
Do not disconnect the device from the computer during this process!
Firmware usually takes a few minutes.
Upon completion of the firmware the device will reboot.
After rebooting, disconnect the device from the computer.
Done!